Clothes line adapter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.36 – €0.44 net (excluding VAT)
For file: clothline_adapter_0.2mm_PETG_MK3S_25m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.40 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 25.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adapter that holds a coat hanger or other things in place on a clothes line
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 88
- Makes
- 4
- Views
- 452
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
This is an adapter that fits onto a clothes line. It holds its position through friction by weaving the clothes line between its body and arms. The holes at the bottom can hold a coat hanger or anything else. (We use them to hold party lights.)
The original model is at least 4 decades old. After about 2 years outdoors under the elements and direct sunlight, one of the originals broke. So I modeled this in OpenSCAD to have replacements whenever I need one.
The 2nd photo shows (from left to right) an original model (blue), a PETG print (yellow) and a PLA print (black). The prints are both made with 100% infill and at 0.2mm layer height. The layer height could be reduced for stronger parts.