Keurig K-Duo Plus Coffee Mug Riser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The K-Duo Plus has plenty of height to fit a tall travel mug.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 109
- Makes
- 0
- Views
- 1,396
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
The K-Duo Plus has plenty of height to fit a tall travel mug. But regular-sized mugs are just too far down there which results in splashing and spattering. Thus this riser.
There is a flat indexing tab on the back to make it easier to set it down straight. I've also preserved the "oh no, I forgot to put a mug in place" hole. Lastly, there is a slightly raised platform on the top to remind you to set the cup a bit towards the rear, as the outlet spout for the K-Kup function is set back as well.
A 38mm and 55mm high version are both included in the files. Pictured is the 38mm version.
Print instructions
Category: Kitchen & Dining Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: Yes
Resolution: .2
Infill: 10
Filament: Hatchbox PLA Black
Notes:
Only need supports under the tab in the back.
I printed with 10% honeycomb infill with top and bottom perimeters set to 0. Then, I added a modifier to enforce 3 perimeters for that last little platform on top. I also used Hilbert Curve top pattern. Not necessary, you can just print with regular perimeters everywhere and normal top pattern, but I think it looks cooler.