1 / 2
Sears/Kemore water softener venturi gasket — image 1
1 / 2

Sears/Kemore water softener venturi gasket

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This thing is the gasket for the venturi assembly for many Sears/Kenmore water softeners (part #82 in the sketch).

Rating
5 / 5
Likes
2
Downloads
25
Makes
0
Views
340
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

This thing is the gasket for the venturi assembly for many Sears/Kenmore water softeners (part #82 in the sketch). You can still get it from Sears Parts, but you have to buy the plastic venturi part with it. The kit costs almost $30 and in my experience, the only part you really need is this gasket. It shouldn't cost more than $.25. Even with the plastic venturi, the cost shouldn't be more than a couple of dollars.

Anyway, this is the kind of price gouging that makes me want to find a different solution. Before I got my 3D printer, I made one of these gaskets with a tire patch and xacto knife. It worked, and was very inexpensive, but was difficult to make accurately.

This is my 3D printed version. I used TPU because that's what I have. Ninjaflex or TPE should work as well.

Print instructions

Category: Replacement Parts Print Settings

Printer: FlashForge Creator pro

Rafts: No

Supports: No

Resolution: .1

Infill: 100%

Notes:

I recommend printing at 100% infill for maximum seal. My prototype was printed at 25% because that is my default and I forgot to change it. It still works just fine, but if/when I print another I will make it 100% infill.

Tags