Gas Meter Sensor Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.22 – €0.27 net (excluding VAT)
For file: Gas Meter Sensor D-Z73 v1_0.2mm_PLA_MINI_18m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.25 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 18 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Sensor for measuring gas consumption using a reed switch held in place by this clip on holder
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 66
- Makes
- 1
- Views
- 1,912
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A holder for D-Z73 reed switch to attach non-invasively to an Actaris gas meter. The meter has two small raised posts which allows the mount to be press-fit into place.
The reed switch is attached to an Aqara Zigbee magnetic door/window sensor, which has been modified to connect an external reed switch.
Hardware
Printing
- Material: PLA Prusament Galaxy Black
- Print Settings (PrusaSlicer): 0.20mm Quality, 15% infill
- Supports: None
Assembly
- Reed switch sensor slides into the holder which is press fit on to the meter
- The reed switch sensor is attached to GND and DI+ connections on the Aqara magnetic sensor PCB. Remember to drill a small hole in the case before soldering the wires to the PCB.