MakeSmith CNC Sharpie Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This Is a work in progress. I was ask to make an adapter that works with the existing mount that would allow a person…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This Is a work in progress.
I was ask to make an adapter that works with the existing mount that would allow a person to mount sharpies and other not spindle items.
this adapter should slide right into parts B10, B11, F2, and F3.
I have tried to include a diagram to display how it should work.
It may be necessary to wrap a little tape around your sharpie if you are using one thinner than i based the model off of.
You will need to print this part four times.
I was thinking that this might also work with an xacto knife if you mounted it in a thrust bearing. we will see.
Instructions
Print part 4 times and assemble as demonstrated in crude included sketch. LOL
Category: Tools