Sanding Block screws with grits imprinted
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed screws from jeffsburton's sanding block. I wanted to have an indicator of what grit sandpaper I had on the…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 291
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Remixed screws from jeffsburton's sanding block (Sanding Block by jeffsburton - Thingiverse). I wanted to have an indicator of what grit sandpaper I had on the block. While obvious sometimes, I thought this would be something nice to have with little effort. There are 16 different grit sizes. If you need a different grit size all I did was import the screw into tinkercad and put text on top and sunk them down into the screw so it would still print flat without supports. The screws are showing with the grit number face up so you can see which ones you need to print. When printing flip them 180 so top of screw is face down. It will print fine.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.3 layer height
Infill:
10%
Filament: eSun PLA Black
Notes:
These settings worked well for me. I did not care about detail and wanted quick print is why I chose .3 and the screw in fine. Not sure if .2 would do any better. The grit numbers show well. You can also paint inside for easier viewing.
Post-Printing =============
Category: Hand Tools