Prusa Ikea Lack Adjustable legs
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.79 – €5.86 net (excluding VAT)
For file: adjustable-ikea-leg_015mm_petg_mk3s_6h14m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.33 excluding VAT (range midpoint).
- Weight reported by the author
- 51 g
- Print time reported by the author
- 6.24 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
2021 update: Now that I have used these legs for a while, I can comfortably say they have been keeping my Ikea lack…
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 103
- Makes
- 0
- Views
- 1,199
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
2021 update:
Now that I have used these legs for a while, I can comfortably say they have been keeping my Ikea lack enclosure leveled. You only need to keep spinning the legs until you start to feel some force, and almost every time you have reached a leveled elevation on all legs. I haven't had the need to touch the legs for a year now.
Instructions:
These legs are made in such a way that you have to place a metal nut inside of the model, while it is printing. Which is why it is advised to use my gcode, since it is programmed to stop once you need to place the nut, inside of the print.
If you for some reason need to make your own gcode settings a STL has been included.
This model does not need support, there is a 1 layer of filament inside of the 3d models, that you have to pick out after printing it before using it.
You are going to need these materials:
1.
https://www.amazon.co.uk/gp/product/B07HBZLKPJ/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
2.
https://www.amazon.co.uk/gp/product/B00O7P206Q/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1
3.
https://www.amazon.co.uk/gp/product/B07MPC5HM3/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
Print instructions
25% infill, with brim. Printed with Prusament Jetblack PETG.
NO SUPPORTS