Skelestruder MMU2S PC4-M6 IR Lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I had no heat set nuts and a lot of PC4-M6 passthrough connectors. Hence, this modified lid was born.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 31
- Makes
- 0
- Views
- 364
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
I had no heat set nuts and a lot of PC4-M6 passthrough connectors. Hence, this modified lid was born. It has the added bonus of allowing the PTFE to pass all the way to just above the gears.
Print as per skelestruder print guide.
Youwill need a longer PTFE tube by a few cm, otherwise there is too much tension and the MMU may not home correctly. Cut it so you have enough that it can comfortably reach when the MMU selector is furthest right and the print head is homed at X=0.
Print instructions
Category: 3D Printer Parts Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: Doesn't Matter
Resolution: 0.2
Notes:
Support not required, brim recommended for smaller pieces touching build plate.