1 / 1
Bearing Roller Guide for TUSH One Piece
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bearing roller guides for the TUSH One Piece
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 62
- Makes
- 1
- Views
- 788
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
I made the TUSH One Piece which is great, but found my cardboard spools liked to roll into the edge so I ended up making these 8mm wide bearing roller guides.
The only downside is that they don't fit through the bottom slot so bearings had to be loaded from the top. I used a bit of plastic sheet on each side of the bearing to allow me to slip them in to the clips from the top.
When I get the chance will remix the holder with a larger slot underneath to allow the bearing and guide to be pushed in.
EDIT: Larger slot version is now available here.