Easy print kokanee dodger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
https://www.youtube.com/watch?v=9AFXi6rgIOA https://www.youtube.com/watch?v=5nHAkGZo0dc Another kokanee dodger, this…
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 81
- Makes
- 0
- Views
- 667
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Another kokanee dodger, this one a bit more triangular, based on 'inspiration' from a new dodger on a facebook group. You 3d print this one flat, with 100% infill, and all concentric infill and exterior. When you heat it back up with a heat gun, boiling water, a hair dryer, etc, it will curl up along the concentric lines, virtually folding itself into the finished dodger. Finish it off with split rings and reflective stickers, and you have a pennies-on-the-dollar dodger.
One model is 2mm thick, one is 3mm. They're both plenty strong and the 2mm bends extremely quickly under heat.
Print Settings
Printer Brand:
TEVO
Printer:
Tornado
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
100%
Filament: Atomic PLA Pearl aqua
Notes:
Print it at 100% infill and with all concentric infill and perimeters. Heat it back up, let it bend, dunk it in water, then post process it.
Add split rings, swivels, and stickers.
Category: Sport & Outdoors