Trolling Motor Rudder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted a little rudder on my trolling motor, so that when I'm off-power I can still use the motor to steer. When…
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 146
- Makes
- 1
- Views
- 1,211
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I wanted a little rudder on my trolling motor, so that when I'm off-power I can still use the motor to steer. When you're on power, the motor works well to point you in the right direction. When you're off power, you have no control. They sell a similar kit for $40 but I figured I'd just make one.
Print Settings
Printer Brand:
SeeMeCNC
Printer:
Rostock Max v3.2
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
100%
Filament: Atomic PETG ultra matte black
Notes:
I CNC cut the rudder itself from 5mm baltic birch plywood and coated it with epoxy resin. You can CNC cut, laser cut, or even 3d print the rudder at 5mm thick and the brackets should work out fine. All hardware is 1/4" or #10 stainless.
Category: Sport & Outdoors