Angled Dry Box Feeder with Source
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired by the design of sarman_1998 I created my own version which can be used in combination with PC4-M6 (and…
- Rating
- 5 / 5
- Likes
- 104
- Downloads
- 617
- Makes
- 19
- Views
- 2,909
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by the design of sarman_1998 I created my own version which can be used in combination with PC4-M6 (and PC4-M10, see below) fitting PTFE tubing (6mm thread), and 2 M3 bolts + hexagon nuts.
The code can be changed to choose your own degree (or place a comment, and I will add a stl)
Items I used:
bolts: M3x10 DIN 7985 (cross) -> as long as it is flat at the side of the thread
washers: DIN9021 3,2mm washer (optional)
nuts: M3 DIN 985 (nylon locking nut) -> outside measures: 5.5 mm (parallel sides of hex), height 4.0 mm (2.4mm hexagon)
I decided to place the center of the holes at a fixed distance of 15mm from the tube-hole (so 30mm between both holes) to make it easy possible to replace them - if I need to do - for another design as long I keep using the same distance.
Thanks to motocoder also a template to drill the holes is included.
2018-09-03: Added a PCx-M10 outside for 10mm connectors, on request of bratej
2018-11-11: v1.1: Improved calculations for the position of the thread, relevant for an angle between 40° and 60°. Thanks to Arnaud.
Print instructions
Category: 3D Printer Accessories Print Settings
Printer: PrimaCreator P120 v3 (Malyan M200)
Rafts: No
Supports: No
Resolution: 0.2mm layer 0.4mm nozzle
Infill: 20% Cube (Cura v3)