Gandalf the Grey - Lithophane
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€20.04 – €24.49 net (excluding VAT)
For file: gandalf_the_grey-withframe-hdlithophane-gadunky.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €22.27 excluding VAT (range midpoint).
- Weight reported by the author
- 100 g
- Print time reported by the author
- 30.83 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Custom lithophane stand included. Software used: Photoshop, Blender, Meshmixer, S3D.
- Rating
- 5 / 5
- Likes
- 60
- Downloads
- 459
- Makes
- 2
- Views
- 4,318
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Custom lithophane stand included.
Software used:
Photoshop, Blender, Meshmixer, S3D.
Dimensions: 176mm x 164mm x 6mm (6.92 x 6.46 x 0.24 inches).
Print settings and information:
https://www.gadunky.com/litho-print-settings/
Note: This is a large and detailed stl file and may put some systems/slicers under pressure. It slices best in Slic3rPE, Cura 3.6+ or S3D.
A note on slicing in Simplify3D:
It’s easiest to slice the lithophane in Cura(or Slic3rPE) as there’s an extra step in Simplify3D due to the way the lithophanes are created(this by design to allow additional editing/printing options for more advanced users).
If you want to use Simplify3D you just need to do the following:
Load the lithophane STL into S3D as normal.
Click Mesh–Separate Connect Surfaces
Slice as normal
The added bonus of doing this is you can re-crop the image into the frame if you wish, or easily resize or remove the frame altogether.
If you don’t do the above in S3D there may be a tiny gap between the frame and the lithophane when you actually slice the model.
Check out more on my site: https://www.gadunky.com/
Print instructions
Print @ 0.1mm or 0.12mm layer height. 6 walls/shells and 100% infill.
Recommended material: Colorfabb Standard White PLA (it helps with the Blaze/hot look)
More info @ https://www.gadunky.com/litho-print-settings/