dupont connector lock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dupont connector lock for 1-6 pins. There are variants for 12 and 14mm dupont connector.
- Rating
- 4.714 / 5
- Likes
- 289
- Downloads
- 1,306
- Makes
- 19
- Views
- 6,120
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
This is dupont connector lock for 1-6 pins. There are variants for 12 and 14mm dupont connector.
Initially I used PLA, but the connector is fragile and propably wont withstand reusing. PETG is more suitable, because it is more flexible and wont brake easily.
However, if you dont have petg, printing the outer piece standing in vase mode in pla is good compromise- the layer adhesion is better than printing vertical without vase mode and it has quite good amount of flexibility.
If you are using single dupont connectors, i recommend using zip-ties for both ends for better rigidity.
Updates:
- 5.6.2022
- The fit of the dupont connector to the inner part is now bigger by 0.4mm, the fit was previously too tight.
- Single connector added.
- 14.6.2022
- 6 pin versions added
This is remix of https://www.printables.com/cs/model/115485-bltouch-connector-lock. I added options for different number of wires. I also use bigger clearance betwen outer and inner part.