Van's RV-12 Rudder & Brake Pedal Extensions
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rudder & Brake Pedal Extensions for a Van's RV-12 aircraft. Different lengths available.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 48
- Makes
- 0
- Views
- 613
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
These files are for Rudder Pedal Extensions for a Van's RV-12 aircraft. The stock pedals use a 1" thick foot pad on the crossbar. The actual additional length is -1" from the size listed on the extension (i.e., 2.5" extension is 1.5" longer that the original). The parts may require post print finishing for the bolt hole and bolt head recess hole depending on your printer setup. I print with 4 perimeters in the slicer to ensure a solid area for any final drilling/sizing. The radius on the curved sections match the Van's OEM parts to ensure the fit is correct and the brake section of the pedal will rotate with no binding.
The 2" and 2.5" extensions require the Brake Pedal Extensions to be added to keep the foot geometry correct in applying the brakes. The Brake Pedal Extension require a hole to be drilled in the brake pedal tube to attach with an AN3 bolt.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3 MMU 2
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
.2mm
Infill:
30
Filament: Matter Hackers Nylon X Carbon Fiber, Black.
PCCF Prusament filament should also work well.
PLA is not recommended unless it is just a prototype for fit checking.
Notes:
Print with one end on the heatbed, holes will be slightly out of round so ream with a drill bit to final size. Recess hole for attachment bolt is sized for an AN (aircraft spec) bolt head.
Post-Printing =============
Part can be annealed to increase strength.
Category: Sport & Outdoors