Falcon F16v3Controller PSU Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple to print, print face down. This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on…
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 79
- Makes
- 1
- Views
- 450
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Simple to print, print face down.
This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell).
The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting.
Mounting Hardware:
2x - M4 - 8mm bolts (secure mount to PSU)
4x - M3 - 12mm bolts/nuts (secure controller to mount)
Print Settings
Notes:
Print Settings
Nozzle: .4mm (.6mm or larger will work too)
Layer Height: .32mm
Perimeters: 3
Solid Layers: 4 top/bottom
Infill: 10%
Speed: Standard, but slower is better for the support brackets
Category: Electronics