Roughcut Masterkey Backplate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Back cover for masterkey, to cover up the big hole that you sawed off This is after doing the slamfire mod, pictures…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 21
- Makes
- 0
- Views
- 399
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Back cover for masterkey, to cover up the big hole that you sawed off
This is after doing the slamfire mod, pictures show where you need to saw off for this part to work.
Hardware needed: 2 screws. Like those that you won't be using after sawing off 30% of the blaster
Slamfire mod: https://www.thingiverse.com/thing:2662112
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: 3DAura PLA Black
Notes:
Print with "Make Overhang Printable" for a result similar to mine in the pictures
Step 0: Cleanup and Fit
If you enabled "Make Overhang Printable", make sure to cleanup the holes first.
The part will not be a perfect fit, so go ahead and use a heat gun to mould the part into the blaster if you want.
Step 1: Drilling
locate the two holes, then drill into the blaster. The holes drilled will be used to secure the part to the blaster itself
Step 2: Screws
just add screws to the holes on both sides of the blaster and printed part, and that's about it
Category: Other