Cable Chain Bracket for use with my Neptune 2 Z-Axis Cable Management Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tidy up the messy Z-Axis cables without needing fasteners, supports an optional cable chain!
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 405
- Makes
- 3
- Views
- 2,902
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to clean up the Z-axis wires on my Neptune 2S, they've touched the table and lead screw during a print before. This cable chain bracket needs M4 t-slot nuts. I use it together with a 10mm x 11mm (W x H) inner 17.5mm x 15mm (W x H) outer cable chain. Sorry I used a salvaged chain so don't have my own print file.
Used with this cable cover: https://www.printables.com/model/219959
Printed well in PLA+ with these settings:
2 walls
0.2mm layer height
10% infill
A little bit of support for the slots and area above the filament detector
Here is a video if you want to relax and watch it assembled to some laid back music: