1 / 3
Employees Must Wash Hair Sign (Kids in the Hall Prop) — image 1
1 / 3

Employees Must Wash Hair Sign (Kids in the Hall Prop)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€3.10 – €3.79 net (excluding VAT)

For file: a6-must wash hair sign_0.2mm_PLA_MK3S_3h27m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €3.44 excluding VAT (range midpoint).

Weight reported by the author
43 g
Print time reported by the author
3.45 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Employees Must Wash Hair Before Pooping - My take on a sign from the new season of Kids In The Hall (Filament Change)

Rating
5 / 5
Likes
24
Downloads
76
Makes
3
Views
739
Reviews
3

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution — Share Alike

Since I don't think I can print a 45 of "Brand New Key" by Melanie I decided to make the next best prop from the new season of The Kids in the Hall. This is from the restaurant sketch in the 8th episode of the season.

The larger size is about A5 size at 148mm (5.8") by 205mm (8.1"). The mini version is A6ish at 105mm (4.13") by 145mm (5.7").

I drew this to be FDM friendly but the bubbles are still a struggle at the A6 size. Though the Arachne engines in recent versions of Cura and PrusaSlicer do a good job with it. The rough edges on a couple of the bubbles is an ironing artifact that wasn't cleaned up before photos were taken.

In both versions, the text/image are embossed from the base of the sign by 0.6mm. That's 3 layers of the 2nd color if printed at a 0.2mm layer height, which seems to work nicely. It's also evening divisible by 0.15 in case you need 4 layers instead of 3 based on your filament choices.

If you print this out and put it in your office's bathroom (next to a bottle of shampoo), I am not responsible for any consequences… but I would like to hear about them.

Settings As Printed (mini):

Layer Height: 0.2mm
3 Perimeters
Detect Thin Walls: On
10% gyroid infill
Ironing: Topmost Layer Only @ 10%
Jessie PLA in White base and Black Lettering

Tags