1 / 5
Mobile power supply (DPS3005) with black and decker battery (freecad files included)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mobile powersupply to, needed when you are on the field and you need power based on the DPS3005 / DPS5005.
- Rating
- 0 / 5
- Likes
- 45
- Downloads
- 175
- Makes
- 0
- Views
- 1,421
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I needed a powersupply to repair things on the go.
The powersupply snaps on a 18/20V Black&Decker battery.
I added:
- A power switch to turn off
- A XT60 Jack - to connect a D60 soldering iron or to charge something else
What do you need:
- 2 parts printed
- Switch (optional)
- 2 (copper) plates (ca. 2cmx2cm) with a hole (i used a copper pipe that I cut open and hammered flat, but other things can work too.
- power socket, style “banana socket”
- 4x M2 Screws 15mm
- 1x M2 Screw 25mm
I also made the same housing for:
- Just a cable adapter
- AXY-FZ35 load (on off button further back & more ventilation)