LEGO flower post cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A normal post cap does not look good enough? I have something nice for you.
- Rating
- 4.875 / 5
- Likes
- 364
- Downloads
- 999
- Makes
- 14
- Views
- 6,258
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
At the moment the LEGO flower post cap is availabel for posts with a diameter of 27.5, 34.5, 42.5, 48.5 and 60.5 mm. But if none of them fits your post it is very simple to scale it. Instructions are below.
Check out my other postcap designs: https://www.printables.com/de/social/256636-seemomster/collections/185470
Instruction for scaling
But if none of them fits your post it is very simple to scale it. You import the postcap stem ID 100 mm for_scaling. It will look something like this:
Make sure that the lock for scaling is closed, as shown in the red circle above. Now you can input your post diameter in mm as the Scale factor. I recommend to add a bit tolerance. Measured: 44.2 mm → Scale factor 44.7 mm. For example for a diameter of 48.5 mm it should look like this:
The same has to be done with the postcap flower ID 100 mm for_scaling.