1 / 29
RGB LED Indoor FPV Micro Quadrotor Race Gate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
RGB LED race gate for indoor FPV micro quadrotors (tiny whoops).
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 80
- Makes
- 0
- Views
- 1,501
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
RGB LED race gate for indoor FPV micro quadrotors (tiny whoops).
Update: I've added wall mount swivels, so you can mount your gates on the wall, and they rotate up against the wall out of the way when not being used.
Built with:
- 2 90-degree elbows
- 2 tees
- 2 flanges
- case
- lid
- 2 pins
- Adafruit Pro Trinket - 5V 16MHz
- Adafruit 60 NeoPixel RGB LED Strip
- 470 ohm resistors
- Tactile Button switches (6mm)
- Shield PCB
- Cheap USB Power Bank
3/4 in. x 10 ft. White PEX Pipe
Wire/Connectors- SN-48B Crimping Tool
22 AWG Wire
More info, source code, instructions: https://www.evilgeniuslabs.org/trinket-pro-rgb-led-micro-quadrotor-race-gate
Print instructions
Category: R/C Vehicles Print Settings
Printer Brand: Monoprice
Printer: Maker Ultimate
Rafts: Doesn't Matter
Supports: Doesn't Matter
Resolution: 0.2mm
Infill: 20%
Filament: Inland PLA White