1 / 2
A/B-X/Y Stomp Switch Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Twin IN and OUT Stomp box
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 273
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
Had a problem on stage….. Needed to swap between Guitar and banjo, And also needed to swap line out and the tuner. Made this box and wired a double passthrough stomp switch. I also added a slot for a 9v battery tray so I could use a live jack and LEDs.
4 jacks, 2 switches, a battery tray and some LEDs were about $50 total, and the box is all but indestructible printed at .15 layer height (cause I'm rough on equipment) but should be fine up to about .3 using PLA. Paint on support for the battery tray opening, but the Jack openings print fine without any.