1 / 2
Newer version of HD RBL replacement base to 3/4 PVC — image 1
1 / 2

Newer version of HD RBL replacement base to 3/4 PVC

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I didn't like the normal green base to the Home Depot RBL lights and I wanted these to go to a 3/4" PVC for path…

Rating
0 / 5
Likes
0
Downloads
34
Makes
0
Views
389
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I didn't like the normal green base to the Home Depot RBL lights and I wanted these to go to a 3/4" PVC for path lighting, so I designed this replacement base.

This is for the lights that were sold this year at Home Depot, which are smaller than the old version previously sold.

This doesn't fit the stock battery pack and It may not fit some of the adapter plates that other people have made (for example the 9 bullet node adapter plate) This design curves in and hits the nodes if they are spaced to close to the edge of the adapter plate.

This does work for my 5 bullet node adapter plate and from what I can tell would work great for the "puck" style adapter plates,

You will need to use supports while printing, located under the 3 adapter plate mounting tabs inside this base.

There are 2 files included here:
One has holes for the wires to run out of so they could connect to pixels I'm mounting on the 3/4 PVC in my case.
The other doesn't have these holes so you could just run the wire inside the PVC or possibly drill your own holes.

Print instructions

Unassociated tags: HD RBL, Jumbo C9

Category: DIY Print Settings

Printer Brand: Prusa

Printer: i3 MK3S

Rafts: No

Supports: Yes

Resolution: .2

Infill: 15

Filament: Filament One PLA Glint Midnight

Tags