Baby bed mobile holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a baby bed mobile holder made for IKEA STUVA FRITIDS Crib with drawers that fits the 20mm wide side of the bed.
- Rating
- 3.5 / 5
- Likes
- 62
- Downloads
- 280
- Makes
- 0
- Views
- 2,822
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Public Domain
This is a baby bed mobile holder made for IKEA STUVA FRITIDS Crib with drawers that fits the 20mm wide side of the bed. You can rotate it and print an extra extension if you want to make it higher.
Print instructions
Printed with support, no raft, and some sanding it may be needed in some areas so that the pin get easyer in the holes. I didn't glue anything, and it stay stabile making it easyer to rotate. You will need 1 x M3 30mm screw and 1 x M3 nut to fix the arcade, and optionally drill 2 screws in the holder to make it more stabile to the bed. I found out that duble tape on inside of the holder will also help and make it look cleaner.