CR 10V2/3 Control box fan stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace your control box exhaust and board fans on CR10 V2/3 You will need an assortment of M3 bolts and some nuts to…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 25
- Makes
- 0
- Views
- 347
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Replace your control box exhaust and board fans on CR10 V2/3
You will need an assortment of M3 bolts and some nuts to complete this project.
The design allows you to pull nuts into the base before attaching fans. Use a shorter bolt and some washers on the bolt head and pull nuts to slot. Remove bolts and just larger bolts to bolt fans on in a later step.
Open case and disconnect fans from board.
Set case bottom aside.
Bolts two pieces together.
Bolt fans on. The one towards the front should have sticker down (exhaust) the back one sticker up (intake).
Test fit fan wiring. I had to extend the front one.
Orient feet up
Print 6 foot cushions from TPU if you wish
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
.25
Infill:
10
Filament: Any PETG Any
Category: 3D Printer Parts