1 / 2
20mm Strap Adapters for Honda CB1100 Mounting Pegs — image 1
1 / 2

20mm Strap Adapters for Honda CB1100 Mounting Pegs

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Strap adapters for 20mm straps to be mounted on the Honda CB1100

Rating
0 / 5
Likes
5
Downloads
38
Makes
0
Views
474
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

This is not an original Honda part or replacement for one, it is a custom part for better mounting of 20mm wide straps that end in a loop on the Honda CB1100.

Make sure you have good layer adhesion and test the print, don't blame me for dropped luggage. Since it will be exposed to nature you should probably not use PLA.

The strap gets inserted through the slot and a small tube section gets inserted that then gets fixed from the sides with button-head screws. The tube section can be printed or for added strength use a metal pipe with an OD of 6mm and ID of 3mm cut to size.

Required Hardware

  • 8 button-head screws M3x16

Notes

Made with the personal version of Autodesk Fusion 360 therefore non commercial only.

Source file included.

Tags