Slide Duplicator for Canon DSLR
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€10.00 – €12.23 net (excluding VAT)
For file: slide_duplicator_0.2mm_PLA_MK3S_11h47m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €11.11 excluding VAT (range midpoint).
- Weight reported by the author
- 125 g
- Print time reported by the author
- 11.79 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Slide duplicator for Canon lens with a reverse ring. It can transfert 24x36mm slides on a 50x50mm frame.
- Rating
- 5 / 5
- Likes
- 153
- Downloads
- 365
- Makes
- 2
- Views
- 3,815
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Slide duplicator for Canon lens with a reverse ring.
It can transfert 24x36mm slides on a 50x50mm frame.
I use it on my Canon 50mm f/1.8 EF lens.
For the assembly, you'll need:
- 6 M3x8 bolts + nuts
- 1 or 2 M3x10 bolts + female threaded inserts M3x5x4
- a reverse ring (google: reverse ring or reverse mount with the filter's diameter of your lens)
Setup:
- make sure the tube slides: insert the larger in the thinner until they slide smoothly.
- fasten all the parts together with the M3x6 bolts/nuts (alternatively you can glue them)
- fix the duplicator on your lens
- insert a slide
- make the focus (I use the scratches as reference)
- block the position with the M3x10 bolt
Tips:
- use an uniform white light . I use a cheap soft box.
- I shot using exposure bracketing so I can choose the best exposition.
Print Settings
Supports:
Doesn't Matter but I don't use support. it can be painful to remove on the slide holder.
Resolution:
0.2mm
Infill:
20%
Filament: Various PLA
Notes:
Support are optional. Printing with a 0.6mm extruder was ok for me.