Blue Seas Switching Circuit Breaker Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use this bracket to mount a Blue Seas switching circuit breaker to any flat surface. I use this for my Baddeley R2D2
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 131
- Makes
- 1
- Views
- 654
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
For my MKIII Baddeley R2D2, I wanted to mount a main power switch in an inconspicous place that was easily accessible.
My main power switch is a 40A, switching circuit breaker from Blue Seas. Unlike many regular circuit breakers that are only rated for a limited number of cycles, this switching breaker is rated for over 10000 cycles, and is much better suited for use as a main power switch.
I decided to mount my switch behind the front wall of the skirt - this would be within easy reach, but not be visible to spectators.
Use the #6-32 mounting screws included with the switch to secure the switch to the printed bracket. Then simply attach the bracket to your mounting surface - the holes are sized for M4 or #4 hardware.
No supports are needed to print this bracket - print it with the large hole facing down. I printed at 0.2mm layer height.