1 / 5
Glock 26 Plus 3 Mag Extension to fit Polymer 80 PF940SC Glock 26 Frame — image 1
1 / 5

Glock 26 Plus 3 Mag Extension to fit Polymer 80 PF940SC Glock 26 Frame

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

First off, thanks to, PrintedFirearm, for providing the "Glock magazine base extension", as it gave me a good starting…

Rating
0 / 5
Likes
30
Downloads
684
Makes
0
Views
4,095
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
GNU General Public License v2.0

First off, thanks to, PrintedFirearm, for providing the "Glock magazine base extension", as it gave me a good starting point,

and

thanks to, joestrander, for providing the "G19 to G26 mag adapter."

I modified the Glock magazine base extension file and combined and added the back part of the "G19 to G26 mag adapter" to it, providing a more stable and full grip for the palm area.

This magazine extension fits well and was tested on a factory Glock 26 10 round magazine and was made for the Polymer 80 PF940SC Glock 26 frame in mind.

Note:

In my experience, it was a tight fit and a bit tricky adding the last 2 - 3 (13 rounds total) rounds to the Factory 10rd magazine, I had to use a Glock Magazine Loader to push down on the magazine/rounds, and load the remaining rounds. Inserting the last 2 - 3 cartridges, I also had to slightly remove the mag extension, a tad bit (like half an inch, more or less) so there would be more clearance with the spring inside of the magazine to push down the rest of the cartridges.

Enjoy!

Print Settings

Printer Brand:

Monoprice

Printer:

Maker Ultimate

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

.2

Infill:

100%

Filament: PRILINE Carbon Fiber Polycarbonate Black


Notes:

You may need a little bit of post-processing/sanding. You also may need to adjust print settings and or the print file dimensions slightly, especially if using different filament material.

Also,

For added strength and stability you can print the orientation of the model with the front, flat portion to the bottom of the build plate, and the back-lip portion to the top, with this orientation you will need supports.

Category: DIY

Tags