Skip and throw
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.97 – €2.41 net (excluding VAT)
For file: hra uzaver_0.2mm_PLA_MINI_2h4m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.19 excluding VAT (range midpoint).
- Weight reported by the author
- 30 g
- Print time reported by the author
- 2.06 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Skip and throw - logic game
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 46
- Makes
- 2
- Views
- 283
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The goal of this game is to end up with as few pins as possible. You can only move by jumping over nearby pins in which case you remove the pin which was jumped over.
Pins are double coloured so you will need to change filament four times throughout printing (in case you use gcode).
I added a version with 33 positions as the original version of the game. “V1”