iRobot Roomba charging base holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.04 – €1.27 net (excluding VAT)
For file: Screw_0.2mm_PLA_MK3S_1h22m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.16 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 1.37 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
iRobot Roomba charging base holder with removable arm
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 41
- Makes
- 0
- Views
- 469
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
iRobot Roomba charging base holder with removable arm
My trusty old iRobot Roomba 555 often pushes its charging base around which ends in that he cannot get back to it to charge himself and then hides in the last corner under the couch or under the bed in addition with an empty battery to fool me even more…
I searched for a mount to fix the way to light base, but they fix the base permanently and cannot be removed quickly to be able to clean under it. So I decided to create my own one to fit this need.
The “base“ part is mounted to the wall and the “arm“ part is sticked into the base and then secured with the “screw” in place. After removing the screw the arm can be removed together with the base of the Roomba.
Printing instructions:
- Speed profile with 0.2 resolution
- No supports or brim used
Happy printing :)