Dim Cover / Shade for Ikea UPPLYST Cloud Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.87 – €1.07 net (excluding VAT)
For file: Cloud Lamp Dim Cover - Ikea UPPLYST_0.6n_0.3mm_PLA_MINI_45m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.97 excluding VAT (range midpoint).
- Weight reported by the author
- 17 g
- Print time reported by the author
- 44.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A lamp cover to dim and shade the Ikea UPPLYST cloud lamp.
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 249
- Makes
- 2
- Views
- 2,823
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
The lamp cover dims and shades the white light of the Ikea UPPLYST cloud lamp.
It's designed to snap onto the mounting plate.
The LEDs have 1-2cm distance to the cover to prevent it from getting hot.
When mounting the lamp to the wall, leave a little space on the back for the snap fit joints.
I printed this model on a 0.6mm nozzle with 0.3mm layer height and 2 perimeters. No supports needed when printing it lying on the top.