1 / 5
Hadley-scope Family: Finderscope Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple bracket to attach a 6x30 finderscope to a Hadley-style telescope.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 146
- Makes
- 1
- Views
- 2,361
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is straightforward. Print with 3-4 perimeters, for sturdiness (optional). This is just an align-able interface for a 6x30 finderscope to help in aiming your Hadley (or similar) telescope. I attached mine to a Fracley.
Bill of Materials
- one additional nut/screw for Hadley (to attach this to the bigger telescope)
- 2x brass heat-set insert (M4 or M5)
- 2x thumbscrew, same thread
- 1x narrow machine screw and nut (selection: it should slide freely through the hole on the underside, but its head and nut should not; I used m3 and m4 without issue)
- 1x spring, which freely slides over the same screw, but is held captive by its head/nut
