Pi4 PoE+ SSD Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for your Pi-4 with PoE+ hat and SSD.
- Rating
- 5 / 5
- Likes
- 54
- Downloads
- 295
- Makes
- 4
- Views
- 2,459
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This case is designed to hold a Pi-4 with PoE+ Hat as well as a standard 2.5” SATA SSD. Sometimes it’s useful to be able to boot your Pi from a SSD rather than an SD card.
Attach the PoE+ Hat to the Pi-4 using the provided screws and spacers. The Pi will then sit in the case beside the SSD. They are both a snug fit and need to be pressed in.
If you have some clear 1.75mm filament, you can add a couple of light pipes to extend the LED’s to the outside of the case.
Then the lid just clips on top. No screws required.
A SATA to USB3 cable connects the SSD to the Pi. The one I’m using here is from Startech, but there are plenty of others.
I wanted this for my Pi-Hole, so included the Pi-Hole logo on the top, just for fun. There’s also a version of the lid without the logo if that’s more your liking.
I've also created a PoE+ version that exposes the HDMI and audio ports as well as a version that doesn't use the PoE+ Hat.