Hex-bit Holder (Drill Index)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.25 – €5.20 net (excluding VAT)
For file: hexbitholder2_02mm_pla_mk3s_5h16m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.73 excluding VAT (range midpoint).
- Weight reported by the author
- 48 g
- Print time reported by the author
- 5.26 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This holder is for drill bits with hexagonal shafts.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 256
- Makes
- 3
- Views
- 1,309
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
This holder is for drill bits with hexagonal shafts. Unlike "ordinary" drill bits, these drills all have the same size shaft at the drill chuck end. I'm using it for drill bits, but it can be used to store hex screwdriver bits and similar items.
Features:
- The well diameters are deep enough to hold these longer items, and are intentionally "loose" to make insertion and removal easy.
- To further ease insertion, the well tops are chamfered.
- Different row heights (angles top) for better access
- Wells are open at the bottom for easier cleaning.
Note: This is not recommended for short bits with shafts less than 1/2in (15mm) as the wells are too deep and they are difficult to remove (see photos). Also note in the photos I have included a photo of a test print to show the internal profile.
The OnShape 3D CAD files for this item can be found here:
Print instructions
To print with no supports, print top down as shown in the photos.
Print settings:
- Set all fills to concentric
- brim not required
- %fill is not relevant as the walls are only 3 layers deep using a 0.4mm nozzle.