Tablet ceiling holder for car
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.50 – €0.61 net (excluding VAT)
For file: corner_pocket_2_pieces_pet.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.55 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 39.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
On long journeys by car it is necessary to indulge in the comfort of the passengers - for example by playing video on…
- Rating
- 4.5 / 5
- Likes
- 129
- Downloads
- 425
- Makes
- 2
- Views
- 4,677
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
On long journeys by car it is necessary to indulge in the comfort of the passengers - for example by playing video on a tablet (children of some fairy tales). That's why I modeled and printed the ceiling holder for 8" tablet.
Print instructions
Best and easy print result by Prusament PETG or ASA. I used white PETG, because due to possible higher temperatures in car in summer PLA may not be suitable. Slicer properties: min. 3 perimeters, layer height 0,2mm, min. 30% infill, detect bridge layers, 3 top/bottom layers, no supports needed. For inserting metric hexagon nuts used M600 command. Latch of holder must clean of support wall after printing. Fasteners: 8x hex.nut M4; 3x hex. nut M5; 2x hex. nut M3; 2x screw flat round head M3x25; 8x screw countersunk head M4x12; 3x mushroom head screw M5x40; 1 piece stainless steel wire dia. 2mm length 20mm(for latch); 1 piece stainless steel wire dia. 2mm length 40mm(for holder); steel tension spring outer diameter max. 7mm with free length max 20mm.