Volvo V70 compatible panel clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I used these around the front bumper for over a year now. They work like the original with press to unlock.
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 185
- Makes
- 2
- Views
- 1,521
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- GNU General Public License v2.0
These clips just like the originals, where you press the pin flush to lock, and press further in ( 4mm ) to unlock.
There are “supports” you can import with the clip body if required. To import them first import the clip body, then right click and choose “add part”, and select the supports. If you print the with the imported supports, tweak the print settings for the “support” components by right clicking them in the part tree, and adding infill and layers + perimeters overrides.
Support Part Settings: Infill should be be grid infill ±30%, Perimeters, Top and Bottom all set to 0.
Use a brim ±2mm for the clip and the pin!
Use low variable layer height for the overhang, 0.05 → 0.07mm
The clip pin is to printed upside down, with the beveled edge on the print bed.