1 / 4
Kyosho Inferno ve front left knuckle arm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Kyosho Inferno ve front left knuckle arm, make sure the base side is flat on the bed as illustrated with the photo.…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 70
- Makes
- 0
- Views
- 448
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Kyosho Inferno ve front left knuckle arm, make sure the base side is flat on the bed as illustrated with the photo.
infill 30-50%
wall thickness 1.5-2mm
need support
ABS for long-lasting
(after printing holes may need rimming with a drill bit )
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.15
Infill:
30-50
Filament: General PLA or ABS
Category: R/C Vehicles