Double life (or anything) counter for table-top games (angeled or adjusted for visibility)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows to join two lifecounters together
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 125
- Makes
- 1
- Views
- 1,243
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Allows to join two life counters together.
Check the original model this remix is based on for more information, this one contains only the different files.
Files to print (original, angeled version):
Life_Counter_V1.00-middlepart.stl
From original: 2x Life_Counter_V1.00-sides.stl (only the one with the hole completely through, 1x normal, 1x flipped)
From original: 2x Life_Counter_V1.00-tube.stl
From original: 2x Life_Counter_V1.00-clip.stl
From original: 6x Life_Counter_V1.00-one_ring.stl
From original: 6x Life_Counter_V1.00-one_spring.stl
Files to print (adjusted for visibility):
Life_Counter_V1.00-visiblity-middlepart.stl
From original: 2x Life_Counter_V1.00-visiblity-sides.stl (only the one with the hole completely through, 1x normal, 1x flipped)
From original: 2x Life_Counter_V1.00-tube.stl
From original: 2x Life_Counter_V1.00-clip.stl
From original: 6x Life_Counter_V1.00-one_ring.stl
From original: 6x Life_Counter_V1.00-one_spring.stl
Printed in PLA with 0.2mm layer height.