1 / 4
Vesa mount plate 75x75mm fixed
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You can use this plate to mount your monitor to a wall if the monitor supports the 75mm Vesa standard.
- Rating
- 4.5 / 5
- Likes
- 19
- Downloads
- 273
- Makes
- 1
- Views
- 989
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You can use this plate to mount your monitor to a wall if the monitor supports the 75mm Vesa standard.
How to use this:
- Print this model.
- Use the model to mark the mounting holes on the wall.
- Drill the mounting holes on the wall.
- Add countersunk screws into the holes on the wall. Use this plate to adjust them, so they are tight, but the plate should be still movable.
- Mount the plate to the back of your monitor with M4x16 countersunk screws.
- Hang the monitor onto the screws on the wall.
Print instructions
Although this model is designed so that the weight of the monitor does not load the layer adhesion, I still recommend using more than usual perimeter count and more infill.