Flux and Solderpaste press / dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
to push small amounts of flux out of the syringe
- Rating
- 5 / 5
- Likes
- 50
- Downloads
- 242
- Makes
- 3
- Views
- 1,956
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
The flux press is designed for spraying a diameter of approximately 18.5mm
To assemble the flux press first connect the lever to the arm and then the main body to the arm. As a joint I glued shortened nails in the holes, to ensure the mobility of the parts use only a little glue on the head of the nail.
Leaver with arm joint:
Ø Nail: 2mm
Ø Head: 5mm
Length: 11mm
Main body with arm joint:
Ø Nail: 2mm
Ø Head: 5mm
Length: 16mm
Then slide the sliders from the front into the main body as shown in the picture.
Last but not least you have to insert the syringe into the holder.
Attention: exact tolerances have been used, so some force may be necessary.
Print Settings:
Material: PETG
Support: YES (only the large hole for the syringe on the main body)
Raft: YES (at least for the sliders)
Layer Height: 0.2mm
The individual files are already aligned so that they can be printed.