1 / 1
ETX70 rear threads to 1.25 eyepiece
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Original by by Spotmatic This allows one to bypass the mirror and use of a 1.25" eyepiece. I suggest using a #8 or #10…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 26
- Makes
- 0
- Views
- 166
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Original by by Spotmatic
This allows one to bypass the mirror and use of a 1.25" eyepiece.
I suggest using a #8 or #10 bolt or possibly M5 or M6 bolt to hold eyepiece. I intentionally made this hole large to allow for nuts and bolts that can be 3d printed as an option.
Nut pocket is 4.42mm deep and 11.8mm at the widest, should accomodate many common nut sizes.
100% infill for strength recommended.
0.2 height on threads
Print Settings
Resolution:
0.2
Category: Hobby