1 / 6
Two (or more) dual color filament, round shape 23,4m length twotone — image 1
1 / 6

Two (or more) dual color filament, round shape 23,4m length twotone

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

DIY two color filament with pause at print

Rating
0 / 5
Likes
20
Downloads
121
Makes
1
Views
784
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Two (or more) color filament, round shape 23,4m length
If you like it --> press like it :-)

Model to print multicolor filament by your own. I don´t understand why other DIY filament models do not have a round shape, so i made it and it works. The diameter is 1,7mm that it will fit into your extruder.

Just make a pause at half height and change the filament.

Take care that your filament consumption in the slicer for the print is slightly more than 23,4mm. If not, adjust your slicer setting and you need not to take care of your flow and you can use your standard setting.

You can also increase the flow a little if consumption is to less.

The length is the maximum possible length on a printer with a 300x300 printer bed, e.g. on a CR-10 V2.

Printed it with 0,4mm nozzle(forgot the print time) and with 1,0mm nozzle(around 3 hours with 0,22mm layer height). The Treefrog Low Poly Planter is printed with 0,5mm layer height, therefore the rough quality.

Would be happy to see your makes!

Tags