Jeep TJ rear fender storage box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small storage box for Jeep TJ (without carpet). Fits in the area between the right rear roll bar and body.
- Rating
- 0 / 5
- Likes
- 74
- Downloads
- 312
- Makes
- 0
- Views
- 3,995
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is a small storage box for a Jeep TJ (1997 - 2006) held in place with magnets.
It fits on the right rear fender behind the roll bar and the bottom of the box is contoured to fit without a carpet kit installed.
There are three 1.26" magnets glued into recesses on the bottom to hold it to the Jeep, and a small 3mm magnet at each corner of the box to keep the lid in place. I glued 4 steel washers to the corners of the lid for the magnets to attach to.
I suppose if you had carpet you could remake the model without the bottom contour or magnets and use Velcro to hold it in place.
This is not a perfect model, but it add some storage to the Jeep. I would definitely call it a “functional print”.
Parts used:
1.26in magnets: https://smile.amazon.com/gp/product/B07QX3HTKD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
3mm magnets: https://smile.amazon.com/gp/product/B08GLS59JS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Printed on an Ender 3 s1 with Overture PLA pro.
We will see how it holds up in the summer with the top off the Jeep.
I printed both pieces at an angle to the bed because it does not fit on my printer and used tree supports. I also used a raft to get the bed adhesion I needed since only a corner of the model was on the bed. (see pictures)