Petmate Kennel Cab II Latch Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is mostly a cosmetic remix of darkspoon's latch cover. (I think the retention clips might be a little stronger.…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is mostly a cosmetic remix of darkspoon's latch cover. (I think the retention clips might be a little stronger. See below.) The corners and edges have had fillets and rounds added to give a smoother appearance and feel. The internals and critical dimensions are untouched.
Works on my Kennel Cab II. Should also work on Kennel Cab.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
.2mm
Infill:
30%
Filament: Overture PLA Black
Notes:
Four walls, four top and bottom layers. Printed flat on it's face. It took a little "persuading" with some soft jawed channel locks to get the second side to snap on but I didn't have any breakage like darkspoon described. The radius on the rod clearance notch minimizes the stress riser on the tab with the latch, which probably helps a lot with that problem.
Category: Pets