1 / 3
IWB Tuckable Holster C-Clip V2 (and V1) — image 1
1 / 3

IWB Tuckable Holster C-Clip V2 (and V1)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Less noticeable than an over the belt clip. Better support than a J-clip. Three lengths included.

Rating
5 / 5
Likes
51
Downloads
406
Makes
1
Views
3,230
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Less noticeable than an over the belt clip. Better support than a J-clip.

Three lengths included. I like the shorter ones for subcompacts.

Fits 1.5 inch belt.

 

And after a few iterations and several months testing we have – Version 2!

V2 changes (7-16-2023):

  • Added an offset from the mounting screw hole(s) to the over-the-pant riser. Makes tucking a shirt easier and/or clears the screw heads above the mounting screw. Unlike adding a spacer, longer screws are not needed.
  • Reduced the width for the belt a bit. Fits with a little less clearance so stays in place better.
  • Widened the over-the-pant gap very slightly to accommodate denim pants with double hemmed or reinforced tops (popular on carpenter-style jeans).
  • Replaced some of the rounds with chamfers or truncated rounds to print more cleanly.
  • Added a one hole clip by popular demand. (Well, it was popular when I demanded it….)

Old version 1 clips are still available for download, too.

Print Settings

Printer Brand:

Creality

Printer: 

CR-10 V2

Rafts:

Doesn't Matter

Supports: 

No

Infill:

99-100% Concentric

Filament:

Hatchbox/Overture PETG

Black

Notes:

For maximum strength print on its side, with the points of the holes up. The holes will print cleanly without any supports.

I usually print PETG with a raft but also had successful prints in PLA without one.

PLA works but I like PETG for the temperature resistance in case it ends up in a hot car or trunk.

How I Designed This

Reverse engineered a Crossbreed J-clip, Added a top retainer, narrowed up the over the pant clearance, and optimized for FDM printing.

 

 

Category: Sport & Outdoors

Tags