Plant Pot on Stilts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A nice plant pot on stilts with a watercatcher
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 28
- Makes
- 0
- Views
- 215
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
A plant pot on 3 stilts. The pot itself has a small hole at the bottom end to drain water. The base has a small hole in the middle to catch the water and conduct the water in 3 directions in the pool. 15% infill for the base should be good enough.
Instead off the printed poles you can use metal also if you have but its not a must have. The poles have a diameter of 6mm and a length of 200mm. Put the seam of the pot behind a stilt so you have a clean surface. Just print walllines 0.2 and no infill for the pot.
The poles should be printed with 3 walllines and minimum 20% infill.
Enjoy