Pump Mount for Comet OCEAN and VIP submersible pumps
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€6.78 – €8.28 net (excluding VAT)
For file: Additional Intake_0.2mm_PETG_MINI_7h45m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.53 excluding VAT (range midpoint).
- Weight reported by the author
- 96 g
- Print time reported by the author
- 7.75 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A pump mount for the Comet OCEAN and VIP submersible pumps. Supports a level switch and additional water tank.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 242
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I use this mount for my self build irrigation system. The pump feeds a GARDENA Micro-Drip-System. I designed multiple models supporting a float switch and a connector for an additional water tank.
To prevent the mount from floating, i filled it with concrete. A larger stone should also help. You can also drill a hole in the mount, so it can be filled with water.
The connector supports a hose with 10mm inner diameter. The additional intake will be placed inside a second water tank. By the principal of communicating vessels, the water level will be equal between the tanks.
Used float switch:
https://www.amazon.de/gp/product/B0746N26VV/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1
Print with supports for the sensor arm.