Wedge for Sunlu FilaDryer S2 with wheel for filament
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Improves drying. This is a remix of the Sunlu FilaDryer S2 Improvement Wedge by VoltexRB with a wheel for the filament.
- Rating
- 4.8 / 5
- Likes
- 53
- Downloads
- 383
- Makes
- 19
- Views
- 4,064
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the Sunlu FilaDryer S2 Improvement Wedge by VoltexRB with a wheel for the filament. So I can remove the spool from the dryer without having to cut the filament. Just flip the wedge if you need the filament to go down from the dryer.
Just print the wedge, wheel and 2× a plug. Cut a piece of filament to a length of ~ < 15mm insert the wheel with the filament axle and use the pugs to fix it in place. For me the plugs were tight enough to keep the wheels in place without glue. Just resize the plugs a little if the fit is not right.